Publicité
Les langues disponibles
Les langues disponibles
Performing a Blood Test
15. Pull off the depth adjustable cap. Without touching the used
disposable lancet, stick the lancet tip into the protective
cover.
16. Holding the release button in one hand I (see picture 16,
step 1) and pulling on the plunger in the other hand (see
picture 16, step 2) will safely eject the used disposable
lancet.
17. Discard the used disposable lancet into an appropriate
puncture-proof or biohazard container.
18. Replace the depth adjustable cap after finishing the test.
PRECAUTION
- Do not apply your blood drop to the sample entry on the strip until you see
the "
"
appear. The meter is performing an internal test and will display
"
" and "
"
if you apply blood too soon. Please repeat the test with a
new test strip.
- Record the date of opening a new test strip vial for the first time. Discard the
vial of test strips after 3 months from opening.
30
All manuals and user guides at all-guides.com
15
16
2
1
17
18
Test Strips
2009.10.01
Alternative site testing-palm or forearm blood sampling
- To do the alternative site testing, please install the
( For detailed information of lancing device, please check the instruction manual
for the lancing device. )
- To increase the blood flow, please massage the puncture area of palm or forearm
for a few seconds.
- Immediately after massaging the puncture area, press and hold the lancing device
with the
clear cap
against palm or forearm.
- Then press the release button.
- Continue holding the lancing device against palm or forearm and gradually
increase pressure for a few seconds until the blood sample size is sufficient.
Performing a Test in Order
clear cap
for your lancing device.
Pressing for
a few seconds
Releasing
button
31
Publicité
