BIONIME Rightest GM550 Mode D'emploi page 11

Setting Up Your Meter- Setting the Time, Volume and Date
You can enter Setting Mode by below two ways.
1. Reload battery
After removing the battery, please press the main button for several times until no signal on screen,
then follow the battery installation steps to load batteries. The meter will do self test. Press the
main button to exit the self test and enter Setting Mode.
2. With Battery inserted
Press the main button first to turn on the meter. Then press and hold the main button for 7 seconds
(the meter will first show backlight, then be turned off during this period, please keep pressing)
until you hear a beep, indicating you have successfully entered Setting Mode. The display screen
will show setting data.
NOTE
- When you keep pressing the main button for 2 seconds, the display on screen will show
backlight. Keep pressing the main button till display is off.
- When you keep pressing the main button for 4 seconds, the display on screen will turn off.
Please don't care it. Keep pressing the main button till entering setting data.
- Quick press the main button allows you to change setting. However, if you want to return to
the time mode, you need to go through all the settings first by pressing quickly the main
button.
18
All manuals and user guides at all-guides.com
Setting Up Your Meter- Setting the Time, Volume and Date
1. Year setting
With the year format blinking, press the Left or Right button to adjust it. Then
press the Main button to confirm it. Meantime, it will shift to next digit for
setting. Repeat the above action until the year setting is completed. Then it
will move to Month setting.
2. Month setting
With the month blinking, press the Left or Right button until the current month
appears. Then press the Main button to confirm it and move Day setting.
3. Day setting
With the day blinking, press the Left or Right button until the current day
appears. Then press the Main button to confirm it and move to Time format
setting.
1)
2)
3)
19