Publicité
Les langues disponibles
Les langues disponibles
Performing a Blood Test
6. Choose a depth of penetration by rotating the top portion of the depth
adjustable cap until the setting depth matches the window. Settings are
based on skin type "
" for soft or thin skin; "
"
" for thick or calloused skin.
7. Hold the hub in one hand and pull on the plunger in the other
hand. The device will be cocked. Release the plunger, it will
automatically move back to its original position near the hub.
8. Wash your hands with warm soapy water and dry thoroughly.
9. Take one strip from the vial. Re-cap the vial cap immediately.
10. Insert the strip into the strip port of the meter with the
indication symbol facing up. The meter confirms the insertion
of the strip with a beep if volume is turned on).
NOTE
- The meter will automatically detect Code number on
strip. You don't have to check the Code number on
the meter display and strip vial.
28
All manuals and user guides at all-guides.com
6
" for average skin;
7
8
9
10
GM550
11. A blood drop symbol appears and is accompanied by a
further beep (if volume is turned on). Now you can apply
the blood sample within 2 minutes.
12. Place the lancing device against your fingertip and press
the release button.
13. Touch and hold the drop to the edge of sample entry until
you hear a " beep " (if volume is turned on) and the View
Window is totally filled with blood. If the View Window is
not totally filled with blood or the test does not start,
please discard the test strip and repeat the test with a new
test strip.
14. You will see the countdown mode on the screen. After 5
seconds, the test result appears.
Performing a Blood Test
11
12
13b
13a
13c
14
29
Publicité
