Publicité
Les langues disponibles
Les langues disponibles
Recalling Test Result and Average
4. Quick Searching: If you want to see all values automatically displayed in sequence, first enter the memory mode.
Then keep pressing the right or left button for 2 seconds. (right button is for searching the tests the latest value to
the oldest one; by using the left button you can scroll from the oldest to the latest one). Anytime you want to stop
just release the pressed button. It will stop and display the current displayed value. You can use this way to find a
particular reading you want to check.
5. Reading right after test: If you just finish the test, press the main button to enter the MEM (memory) screen and
review the latest test result.
NOTE
- Your Control Solution results will be automatically non-averaged without selecting, but still can be recalled.
The Control Solution Test results will show with "CS" symbol under memory screen.
PRECAUTION
- You have to set the time and date to activate the average function.
- The "
" , "
" results, the Control Solution results and the test result made out of normal temperature
range ( <10℃, >40℃ ) are not calculated in the average.
42
All manuals and user guides at all-guides.com
37
Maintenance
Keep your meter and test strip free of dust, water or any other liquid. Store the meter in the carrying
case when not in use. If meter is dropped or damaged, perform a quality control test with the control
solution before doing a blood glucose test.
Cleaning Meter
Clean the outside of the meter with a damp cloth and mild soap/detergent. Keep the test strip port
from getting wet.
Cleaning Test Strip Port
If your Test Strip Port is stained with blood, control solution or any liquid, please use a dry tissue or
alcohol swab to clean it up immediately. Do not use any thing wet to clean it. Perform a quality control
test to ensure the system is working properly.
Caring for Your Meter
43
Publicité
