Christopeit Sport SP2000 Instructions De Montage Et D'utilisation page 21

Les langues disponibles

STEP 11

Connect the curl bar (12) at cable 2 (39)

1. Connect the curl bar (12) at cable 2 (39) by using the long

chain (45) and carbine hooks (3).

Using of carbine hooks

a. Loose the screw nut of C-hook(3) and put the chain (45/46)

into the C-hook(3).

b.Put the cables' end (39+40) or pull bars (12+15) into the

C-hook (3).

c. Screw the nut of carbine hook (3) tightly and ensure that it

is closed.

Attention! Before start exercising ensures that the 5 carbine

hooks (3) are closed tightly.

STEP 12

Installation of weight cover (16).

1. Insert the weight cover holder (28) into ends of weight

covers (16). Place the weight cover (16) to top and bottom

cover bracket (22+82) and x each weight cover end with ca-

ble ties (61).

2. Use the buttery nut (33) to adjust the tightness o cover

(16) so that the weight don't touch the cover during Lift up

and down. Turn clockwise to tighten and turn anticlockwise for

loosen the weight cover.

3. Attach the product label (108) to the top cover bracket (82)

with 2 wire ties (61).

CHECKS

1. Check the correct installation and function of all screwed

and plug connections. Installation is thereby complete.

2. Before starting training, ensure that the recommended

safety clearances are maintained to other objects.

3. When using the machine, always be sure to wear suitable

headwear and clothes. This must protect against catching hair

or clothing and trapping hair or clothing in the moving parts of

the machine.

4. When everything is in order, familiarise yourself with the

machine with light weights. The weights have to secure with

security pin (30). Maximum load of weight: 56Kg.

Note: Depends on exercising you can use latissimus bar (15)

instead of curl bar (12) at both cable connections points.

108