Publicité
Les langues disponibles
Les langues disponibles
en
24
Working instructions.
Before mounting or replacing application tools or accessories, remove the
WARNING
battery. This preventive safety measure rules out the danger of injuries
through accidental starting of the power tool.
For each job, use only the FEIN application tool released and intended for the respec-
tive application.
Switching on and off (figure 10).
Always hold the power tool
CAUTION
firmly. Otherwise, you could
lose control over the power tool.
To switch the angle grinder on, actuate the
switch on the motor housing. The lamp
lights up for approx. 3 seconds. Within this
time, actuate the switch on the auxiliary
handle. When the lamp goes out, the angle
grinder can no longer be switched on via the
switch on the auxiliary handle.
In this case, release the switch and repeat the
procedure.
Fig. 10
2.
1.
3.
3.
On/Off switch
Publicité
