Fein CCG18-125-10PD-SEC AS Mode D'emploi page 20

en
20
Adjusting the handle (figure 4).
Open both engaging hooks.
Remove the safety cover.
Turn the clamping screw anticlockwise to
the stop.
The clamping screw must be completely
released. Otherwise the power tool
may be damaged.
Adjust the handle to one of the handle posi-
tions.
Tighten the clamping screw in clockwise
direction.
Fig. 4
1.
1.
Engaging hook
Safety cover
2.
4.
3.
Clamping screw
5.
6.
Auxiliary handle