Fein CCG18-125-10PD-SEC AS Mode D'emploi page 19

Handling the battery.
Store, operate and charge the battery only
using FEIN battery chargers within the oper-
ating-temperature range between
5°C – 45°C (41°F – 113°F). At the begin-
ning of the charging procedure, the battery
temperature must be within the battery
operating-temperature range.
Battery charge-control indicator
(figure 3).
The charge condition can be indicated by the
green LEDs of the charge-control indicator
on the battery. Press the charge-control
indicator button
charge condition.
LED indi- Meaning
cator
1 – 4 Percent-
green LED age of
charge
condition
Continu- Battery is
ous red almost
light empty
Red flash- Battery is
ing light not ready
for opera-
tion
The real percentage of the battery charge
condition is only indicated when the power
tool motor is stopped.
The electronics automatically switch off the
motor prior to the battery being deep dis-
charged.
When no LED lights up after pressing the
charge-control indicator button, the battery
is defective and must be replaced.
or to indicate the
Activity
Operation
Charge battery
Bring the battery
into the battery
operating-temper-
ature range, then
charge
LED indication on battery
Fig. 3
en
19
80-100 %
60-80 %
40-60 %
20-40 %
5-20 %
0-5 %