Publicité
Les langues disponibles
Les langues disponibles
71113.13.16
The contents of this manual are considered to be proprietary
and confidential to Ingersoll Rand and should not be
reproduced without the prior written permission of
Ingersoll Rand .
Nothing contained in this document is intended to extend
any promise, warranty or representation, expressed or
implied, regarding the Ingersoll Rand products described
herein . Any such warranties or other terms and conditions
of sale of products shall be in accordance with the standard
terms and conditions of sale for such products, which are
available upon request .
This manual contains instructions and technical data to
cover routine operation and scheduled maintenance tasks
by operation and maintenance staff . Major overhauls are
outside the scope of this manual and should be referred to an
authorised Ingersoll Rand service department .
Any modification to any part is absolutely prohibited and
would result in the CE certification and marking being
rendered invalid .
All components, accessories, pipes and connectors added to
the compressed air system should be:
•
of good quality, procured from a reputable manufacturer
and, wherever possible, be of a type approved by
Ingersoll Rand .
•
clearly rated for a pressure at least equal to the machine
maximum allowable working pressure .
•
compatible with the compressor lubricant/coolant .
•
accompanied with instructions for safe installation,
operation and maintenance .
Details of approved equipment are available from
Ingersoll Rand Service departments.
The use of non−genuine spare repair parts other than those
included within the Ingersoll Rand approved parts list may
create hazardous conditions over which
Ingersoll Rand has no control . Therefore Ingersoll Rand
does not accept any liability for losses caused by equipment
in which non−approved repair parts are installed . Standard
warranty conditions may be affected .
Ingersoll Rand reserves the right to make changes and
improvements to products without notice and without
incurring any obligation to make such changes or add such
improvements to products sold previously .
The intended uses of this machine are outlined below and
examples of unapproved usage are also given, however
Ingersoll Rand cannot anticipate every application or work
situation that may arise .
IF IN dOUBT CONSULT SUPERVISION .
This machine has been designed and supplied for use only in
the following specified conditions and applications:
•
Compression of normal ambient air containing no
known or detectable additional gases, vapors or
particles .
•
Operation within the ambient temperature range
specified in the PRODUCT SPECIFICATION SHEET .
80447113 Rev.A
All manuals and user guides at all-guides.com
FOREwORd
The use of the machine in any of the situation types listed
in table 1:−
a)
b)
c)
TABLE 1
Use of the machine to produce compressed air for:
Use of the machine outside the ambient temperature
range specified in the PRODUCT SPECIFICATION SHEET .
Use of the machine where there is any actual or foreseeable
risk of hazardous levels of flammable gases or vapors .
THIS MACHINE IS NOT INTENDED AND MUST NOT BE USED
IN POTENTIALLY EXPLOSIVE ATMOSPHERES, INCLUDING
SITUATIONS WHERE FLAMMABLE GASES OR VAPOURS MAY
BE PRESENT .
Use of the machine fitted with non Ingersoll Rand
approved components .
Use of the machine with safety or control components
missing or disabled .
The company accepts no responsibility for errors in
translation of this manual from the original English version .
Is not approved by Ingersoll Rand,
May impair the safety of users and other persons,
and
May prejudice any claims made against
Ingersoll Rand .
a)
direct human consumption
b)
indirect human consumption, without suitable
filtration and purity checks
3
Publicité
