Publicité
Les langues disponibles
Les langues disponibles
Fabric Separator (for
joining lining to fabric)
✽ Use this technique for sewing
velvet and lining together.
1 Raise needle and foot.
2 Move separator so it sits under
presser foot.
3 Make sure it is lined up so that
the needle passes through the
slot of the separator without
hitting the plate itself.
4 Secure fabric separator in place
with screws.
5 Set pressure of sewing feet and
feed position to pin feeding
position.
6 Pull thread until lower needle
catches fabric.
✽ Sew 2-3 reinforcement stitches.
7 When not using separator, it
can be swung off to the side as
illustrated in drawing.
Note
• Lighten the presser foot pressure slightly when using the fabric separator.
• Use the separator to neatly sew 2 layers of hard to manage fabrics together by keeping them
from interacting with one and other before the needle sews them together in a perfect seam.
Needle
Separator
Fabric
Separator
Needle
Lining
Separator
Velvets
25
Publicité
