Publicité
Les langues disponibles
Les langues disponibles
Upper Threading for Thick Fabrics or When Using Heavier Threads
For a tighter upper thread, such as when
sewing thick fabrics or using heavier
threads, thread the machine as described
below.
1
7
26
8
3
4
5
9
0
A
✽ Thread tension may not be
adjusted adequately if the thread
does not pass correctly through
the take-up spring (4).
4
16
1
1 Refer to page 15 to
thread the three-holed
thread guide.
9
0
A
9 Pass the thread through the thread guide.
0 Pass the thread behind the needle bar thread guide.
A Pass the thread through the needle
from left to right.
✽ For details on using the needle
threader, refer to page 17.
2
6
4
3
5
2 Pass the thread through
5 Pass the thread through
the thread guide (right).
the thread guide (lower).
3 Pass the thread
6 Pass the thread through
clockwise around the
the thread guide (right)
thread tension dial.
again.
4 Pass the thread through
the thread take-up spring.
2
3
The upper thread tension can be adjusted by sliding the thread guide
(right) to the left or right. Loosen the screw, and then slide the thread
guide (right) to the desired position. Once the thread guide is in the
desired position, tighten the screw to secure the guide.
General thread tension is adjusted with the thread tension dial. Refer
to page 18.
✽ Use the appropriate needle for the thread or topstitch needle, when
using heavier threads. Adjust stitch length and tension as needed.
7
8
7 Pass the thread
through the thread
take-up lever from
right to left.
8 Pass the thread
through the thread
guide (left).
1
1 Screw
2 Thread guide (right)
3 Looser
4 Tighter
4
Publicité
