Brother 884-T79 Manuel D'instructions page 25

Invisible Zipper Foot
1 Attach invisible zipper foot.
2 Align zipper with fabric. Mark
the base of the opening
approximately 2 cm (approx.
3/4 inch) above the end of the
zipper.
3 Baste the zipper position.
4 Separate the seam allowance.
5 With the zipper mounted, baste
just the seam margin on one
side of the zipper.
6 Close the zipper and baste the
other side of the zipper.
7 Remove the basting at the
zipper position.
8 Fit the zipper teeth into the
presser foot groove, guide the
teeth to prevent them from
coming out of the groove, and
sew to the base of the opening.
✽ When sewing with the teeth to
the right, the left side of the foot
should line up with the left teeth
of the zipper.
Teeth
Baste
Slide
Base of
Opening
2 cm
Basting Basting
1/4" Foot
● Sewing machine settings:
Stitch length = 2 - 2.5 mm
• Sew a consistent seam
allowance (1/4", 6.4 mm) when
piecing together a quilt.
• Use guides (mark) to begin,
end, or pivot 1/4" (6.4 mm) from
edge of fabric.
• Accurately topstitch 1/8" (3.2
mm) from seam.
Seam allowance
(1/4", 6.4 mm)
Align this
mark with
edge of
fabric
Beginning
of
Align this
stitching
mark with
edge of
End of
fabric
stitching
Top of fabric
Seam
(1/8", 3.2 mm)
23