Publicité
Les langues disponibles
Les langues disponibles
Basic Sewing (2)
CAUTION
Make sure the power to the machine is off before changing presser feet.
Rolled Hem Foot
1 Attach rolled hem foot.
✽ Refer to page 19 for instructions
on changing sewing feet.
2 Position the fabric (reverse side
facing up) under the presser foot.
Insert needle approximately 0.5 cm
(approx. 3/16 inch) from the edge
of the fabric and sew 2 stitches.
3 Turn the handwheel towards
you to raise the needle, raise the
presser foot, then pull the fabric
forward.
✽ Be sure not to unthread the
fabric while pulling it forward.
4 Hold the 4 threads in your left
hand.
0.5 cm
0.5 cm
Thread end
5 With your right hand, put the
edge of the rolled hem under
the presser foot, from the spot
where the threads come out.
Insert the edge so that it lies
directly under the needle. Lower
the presser foot.
6 Pull gently on threads in left
hand while sewing the first 3-4
stitches to hold them in place.
7 Fold hem over about 0.5 cm
(approx. 3/16 inch) and continue
feeding folded hem under
foot while sewing towards the
curved guide on the foot.
Thread
Rolled Hem
21
Publicité
