Publicité
Les langues disponibles
Les langues disponibles
Changing Presser Feet
CAUTION
Make sure the power to the machine is off before changing presser feet.
Changing Presser Feet
(Zipper Foot)
1 Raise presser foot, and raise
needle to highest position.
2 Loosen and remove screw using
screwdriver.
3 Attach zipper foot and tighten
screw.
✽ Use the same method to attach
the other feet that come with
your machine.
✽ Use the position knob on back
of the zipper foot to adjust
position of foot in relation to
needle.
✽ Only the zipper foot has a
position knob. You can begin
sewing with all other presser
feet immediately after attaching.
Presser Feet
● Pin Feed Foot
For perfect stitching
on otherwise
difficult fabrics like
velvet, leather and
suede.
● Rolled Hem Foot
Use on the edge
of fabric, such as
on hems of dress
shirts, to fold the
edge of the fabric in
while sewing.
● Free Motion
Quilting Foot
Spring action foot
for darning, quilting
or free motion
embroidery.
● 1/4" Foot
For quilt and
patchwork piecing
with 1/4" or 1/8"
seam allowance.
✽ Use presser feet supplied with your machine. Each foot is
specially designed for this machine and has clearance for
the pin at the rear of each foot.
● General Purpose Foot
This foot is used for
most sewing. (Can
also be used for
sewing thick fabrics
or seams.)
✽ When sewing thick
seams, lightly guide
the fabric with
your hand on the
downward side of
the seam.
✽ Can also be used
with pin feeding.
● Invisible Zipper Foot
Use to attach
concealed fasteners.
● Zipper Foot
Use to attach
fasteners other than
concealed fasteners.
The zipper foot
can also be used
to secure piping in
place as you sew.
Use the side of the
foot closest to the
needle to rest against
the edge of the
piping as you sew.
19
Publicité
