Brother 884-T79 Manuel D'instructions page 12

Before You Begin (2)
Thread Cutter Button
CAUTION
When the machine stops due to
jammed threads and so forth, do
not press on the foot controller;
turn power off, and move the
needle with the handwheel to
check the situation. Otherwise
broken needles could result.
● The thread cutter trims upper
and bobbin threads at the end
of seams.
Needle Stop Position Button
● When indicator lamp is lit up,
the machine will stop sewing
with the needle lowered through
the fabric.
● When the indicator lamp is
off, the machine will stop as
soon as the foot controller is
released at the end of stitching.
In that case, the needle does
not always stop in the same
position.
● If the safety device is activated,
for example if the thread
becomes tangled, the indicator
lamp flashes. (page 28)
10
Thread Cutter Button
✽ Ensure presser foot lever is down
before using.
Indicator Lamp
Needle Stop Position Button
Feed Dog Adjustment Knob
● Height of feed dog can be
adjusted to coincide with fabric
weights.
Foot Pressure and Feed Dog Position
(Feed Dog Down)
(Pin Feeding)
Lightweight Fabrics
Mediumweight Fabrics
Heavyweight Fabrics
Select one of four feed dog positions according to your needs.
Note
• If a setting other than is selected, the pin feed mechanism will not
operate.
• Coordinate the color coding for proper foot pressure and feed dog settings.
• When activating the Pin Feed Mechanism, use only the Pin Feed Foot or the
General Purpose Foot.
Feed Dog Adjustment Knob
Velvet