GE 25880 Mode D'emploi page 26

4. Use the base or cordless handset touch-tone pad to enter a name (up
to 15 characters). More than one letter is stored in each of the number
keys. For example, to enter Bill Smith, press the 2 key twice for the letter
B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the
letter L. Press the 5 key 3 times for the second letter L, and press the 1
key to insert a space between the first and last name. Press the 7 key 4
times for the letter S; press the 6 key once for the letter M; press the 4
key 3 times for the letter I; press the 8 key for the letterT; press the 4 key
twice for the letter H.
5. Press the memory/conference button again to save your selection.The
display shows ENTERTEL NUMBR.
NOTE: If you make a mistake, press the delete button on the base or del/chan
on the handset to backspace and erase the wrong character(s) or number(s).
6. Use the touch-tone pad to enter the area code followed by the telephone
number (up to 24 digits, including pauses) and press the memory/
conference button again to save your selection. The unit beeps to confirm.
7. To enter another name and number in a different memory location,
return to step 1 and repeat the process.
Storing a Redial Number
1. Make sure the phone is OFF (not inTALK mode).
2. Repeat step 1 through 6 in Storing a Name and Number in Memory.
3. Press redial to display the redial number and name.
4. Press memory/conference again to confirm.
NOTE : If the number you want to redial has more than 24 digits, the
telephone number cannot be stored in memory.
Inserting a Pause in the Dialing Sequence
Press the #pause button on the touch-tone pad twice to insert a delay in the
dialing sequence of a stored telephone number when a pause is needed
to wait for a dial tone (for example, after you dial 9 for an outside line, or
wait for a computer access tone.) Each pause counts as 1 digit in the dialing
sequence.
26
All manuals and user guides at all-guides.com