GE 25880 Mode D'emploi page 25

Conference the External Caller with Cordless Handset and Base
1. Press the page/intercom button on base or int/transfer button on cordless
handset.
The external caller is placed on hold, and a paging tone sounds at the
base and cordless handset. PAGING ou PAGING HANDSET displays on
the originating unit and PAGING FRM BASE ou PAGING FROM HANDSET
on the other unit.
2. Press the transfer/int button on handset or page/intercom on base to set
up the intercom.Then press the memory/conference button on base or
handset to retrieve the external caller.Three-way conversation begins,
and CONFERENCE shows in the display.
NOTE: The handset or the base can enter conference directly by pressing talk/
call back button on the handset or speaker/call back button on the base while the
other party (handset or base) is on the external line.
Memory
The cordless handset and base each have their own separate memory
storage areas. Store ten 15-character names and 24-digit telephone
numbers in the handset and base memories.
Storing a Name and Number in Memory
1. Press the memory/conference button on the handset or base.
2. Press the desired memory location button (0 through 9 number keys) or
use the caller ID (rev or skip) button on the base or the caller ID/vol (- or
+) button on the cordless handset to scroll to the desired location. If the
memory location is occupied, the stored name and number displays. If
the memory location is unoccupied, EMPTY shows in the display.
3. Press the memory/conference button again. The display shows
ENTER NAME.
All manuals and user guides at all-guides.com
25