Publicité
Les langues disponibles
Les langues disponibles
1 Guard
1 Side handle
1 Backing flange
1 Keyless clamp nut
1 Hex key
1 Instruction manual
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Electronic Brake
Date Code Position (Fig. D)
The date code
11
, which also includes the year of manufacture,
is printed into the housing.
Example:
2018 XX XX
Year of Manufacture
Description (Fig. A, B)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Spindle lock button
1
Spindle
2
Side handle
3
Backing flange
4
Clamp nut
5
Guard
6
Paddle switch
7
Paddle lock-off lever
8
Guard release lever
9
LED Indicator
10
Intended Use
Your heavy-duty small angle grinder has been designed
for professional grinding, sanding, wire brushing and
cutting applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
Your heavy-duty angle grinder is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Features
No-Volt
The No-volt function stops the grinder restarting without the
switch being cycled if there is a break in the power supply.
E-Clutch
This unit is equipped with an E-Clutch (Electronic Clutch), which
in the event of a stall or wheel pinch, the unit will be shut off to
reduce the reaction torque to the user. The switch needs to be
cycled (turned on and off) to restart tool.
Brake
When the slider switch is released the motor immediately turns
off and electronically brakes stopping the accessory quickly.
Kickback Brake
When a severe pinch, stall, or bind-up event is sensed the
electronic brake engages with maximum force to quickly stop
the wheel, reduce the movement of the grinder, and shut the
grinder off. The switch needs to be cycled (turned off and then
on) to restart tool.
Constant Clutch
When overloaded or stalled the motor torque is reduced. If load
is reduced the torque and RPM will increase. If the tool is stalled
for an extended amount of time it will shut-off and require the
switch to cycle to restart.
Electronic Soft Start
This feature limits the initial start up momentum, allowing the
speed to build up gradually over a 1 second period.
LED Indicator (Fig. A)
The LED indicator
10
will remain lit green during normal
activity, or blink in a pattern of red light to alert you a tool
protection feature has been activated. Refer to the LED Guide at
the back of this manual for explanations of blink patterns.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. Be sure the
trigger switch is in the OFF position. An accidental start-up
can cause injury.
Attaching Side Handle (Fig. B)
WARNING: Before using the tool, check that the handle is
tightened securely.
English
7
Publicité
