Télécharger Imprimer la page

Danby DDW1801MW Instructions D'installation page 21

Masquer les pouces Voir aussi pour DDW1801MW:

Publicité

Les langues disponibles

Les langues disponibles

Check Operation:
1. Read the Use and Care Guide that came with your dishwasher.
2. Check that all parts have been installed and no steps were skipped.
3. Check that you have all the tools you used.
4. Start dishwasher and allow it to complete the shortest wash cycle. After the fi rst two minutes, unlatch door, wait fi ve
seconds, then open door.
5. Check to see that there is water in the bottom of the dishwasher tub. Check that dishwasher is working properly. If not,
disconnect power or unplug dishwasher and see below section.
If the Dishwasher Does Not Operate
First try the solutions suggested here to possibly avoid the cost of a service call.
Has the circuit breaker tripped or the house fuse blown?
Is the door closed tightly and latched?
Has the cycle been set correctly to start the dishwasher?
Is the water turned on?
If none of these work, call 1-800-263-2629
All manuals and user guides at all-guides.com
INSTALLATION INSTRUCTIONS
19

Publicité

loading

Ce manuel est également adapté pour:

Ddw1802ebls