Publicité
Les langues disponibles
Les langues disponibles
Make Electrical Connection
Check "Electrical requirements" section.
You need to:
•
Have the correct electrical supply and recommended grounding method.
If you are:
•
Direct wiring, use Option 1
•
Using a power supply cord, use Option 2
Option 1 - Direct Wire Method
WARNING:
•
Electrically ground dishwasher.
•
Connect ground wire to green ground connector in terminal box.
•
Do not use an extension cord.
•
Failure to follow these instructions can result in death, fi re, or electrical shock.
1. Route direct wire so that it does not touch dishwasher motor or lower part of dishwasher tub.
2. Pull direct wire through hole in terminal box.
Helpful Tips:
•
Select the proper size twist-on connectors to connect your household wiring to
16-gauge dishwasher wiring.
•
Insert wire ends into twist-on connector. Do not pre-twist bare wire.
•
Twist connector.
•
Gently tug on wires to be sure both are secured.
3. Connect the wires as follows using twist-on connectors sized to connect direct wire to 16-gauge dishwasher wire:
4. Tighten clamp connector or conduit connector screws.
5. Reinstall terminal box cover with wires inside terminal box. The cover must be outside the box on the left side.
6. Make sure no wires are pinched by cover.
All manuals and user guides at all-guides.com
INSTALLATION INSTRUCTIONS
Electrical Shock Hazard
Power supply wire:
ground wire
Ground
White
Terminal box wire:
white
white
black
black
ground connector
Black
Terminal
box cover
14
Publicité
