Error Displays/Messages - Sony DSX-A60BT Mode D'emploi

The connected BLUETOOTH audio device
cannot be controlled.
 Check that the connected BLUETOOTH audio
device supports AVRCP.
Some functions do not work.
 Check if the connecting device supports the
functions in question.
A call is answered unintentionally.
 The connecting phone is set to answer a call
automatically.
Pairing failed due to time out.
 Depending on the connecting device, the
time limit for pairing may be short.
 Try completing the pairing within the time.
BLUETOOTH function cannot operate.
 Turn off the unit by pressing OFF for more
than 2 seconds, then turn the unit on again.
No sound is output from the car speakers
during handsfree call.
 If the sound is output from the cellular phone,
set the cellular phone to output the sound
from the car speakers.

Error displays/Messages

CHECKING
 The unit is confirming the connection of a
USB device.
 Wait until confirming the connection is
finished.
ERROR
 There may be an internal malfunction.
 Press OFF for more than 2 seconds (the
display disappears), then press OFF again.
ERROR-99
 There may be an internal malfunction.
 Press OFF for more than 2 seconds (the
display disappears), then press OFF again.
If the error indication remains on in the
display, consult your nearest Sony dealer.
NO AF (no alternative frequencies)
 There is no alternative frequency for the
current station.
 Press SEEK +/– while the program service
name is flashing. The unit starts searching
for another frequency with the same PI
(program identification) data ([PI SEEK]
appears).
NO MUSIC
 The USB device does not contain a music file.
 Connect a USB device with a music file in it.
NO NAME
 An album/artist/track name is not written in
the USB.
NO SUPRT (not supported)
 USB hub is not supported on this unit.
 The connected USB device is not supported.
For details on the compatibility of your USB
device, visit the support site on the back
cover.
NO TP (no traffic programs)
 The unit will continue searching for available
TP stations.
NO USB
 USB is selected as source without a USB
device connected. A USB device or a USB
cable has been disconnected during
playback.
 Be sure to connect a USB device and USB
cable.
OVERLOAD
 USB device is overloaded.
29
GB