Bt Init (Bluetooth Initialize); Sound Setup; Eq3 Prst (Eq3 Preset); Eq3 Low, Eq3 Mid, Eq3 High - Sony DSX-A60BT Mode D'emploi

REPEAT (page 15)
REGIONAL
Restricts reception to a specific region:
[ON], [OFF]. (Available only when FM is
received.)
LOUDNESS (dynamic loudness)
Reinforces bass and treble for clear sound
at low volume levels: [ON], [OFF].
BTM (page 11)

BT INIT (BLUETOOTH initialize)

Initializes all the BLUETOOTH related
settings (pairing information, preset
number, device information, etc.).
When disposing the unit, initialize all the
settings. (Available only when the unit is
turned off.)
20
GB

Sound Setup

EQ3 PRST (EQ3 preset)

Selects an equalizer curve from 7 equalizer
curves or off: [XPLOD], [VOCAL], [EDGE],
[CRUISE], [SPACE], [GRAVITY], [CUSTOM],
[OFF].
The equalizer curve setting can be
memorized for each source.

EQ3 LOW, EQ3 MID, EQ3 HIGH

Sets [CUSTOM] of EQ3.
Customizes the equalizer curve.
The volume level is adjustable in 1 dB
steps, from -10 dB to +10 dB.
BALANCE
Adjusts the sound balance: [RIGHT-15
(R15)] – [CENTER (0)] – [LEFT-15 (L15)].
FADER
Adjusts the relative level: [FRONT-15 (F15)]
– [CENTER (0)] – [REAR-15 (R15)].
AUX VOL (AUX volume level)
Adjusts the volume level for each
connected auxiliary device:
[+18 dB] – [0 dB] – [-8 dB].
This setting negates the need to adjust
the volume level between sources.
BTA VOL (BLUETOOTH audio volume level)
Adjusts the volume level for each
connected BLUETOOTH device: [+18 dB] –
[0 dB] – [-8 dB].
This setting negates the need to adjust
the volume level between sources.