Ecolab DG1-III-DLA-PCB Manuel D'utilisation page 79

Safety instructions in the operating instructions
Safety instructions can refer to specific, individual operating instructions.
These safety instructions are embedded in the operating instructions, so they do not
interrupt the reading flow when executing the action.
The signal words described above are used.
Example:
1.
Loosen screw.
2.
CAUTION!
Risk of trapping on the cover!
Close the cover carefully.
3.
Tighten screw.
Tips and recommendations
This symbol highlights useful tips, recommendations and information for an
efficient and trouble-free operation.
Further markings
The following markings are used in this manual to highlight operating instructions, results,
collections, references and other elements:
Marking Explanation
1., 2., 3. ... Step by step operating instructions
ð Results of the operating steps
References to sections of this manual and related documents
Collections in no set order
[Button] Controls (e.g., button, switch), indicators (e.g., signal lights)
'Display' Screen elements (e.g., buttons, assignment of function keys)
Article numbers / EBS numbers
Both article numbers and EBS numbers may be given in this User Manual.
EBS numbers are Ecolab-internal article numbers and are used within our
corporate group.
Copyright
This manual is copyright protected. All rights reserved by the manufacturer.
Transferring this manual to third parties, reproduction in any form, even partially, and the
exploitation and/or disclosure of the contents without written permission from Ecolab
Engineering (hereinafter "the manufacturer") is prohibited except for internal purposes.
Any contravention of this will result in claims for damages.
The manufacturer reserves the right to assert additional claims.
7
General remarks
MAN049250 Rev. 1-01.2021