Ecolab DG1-III-DLA-PCB Manuel D'utilisation page 100

Assembly and installation
Fig. 4: Swivel spout
CAUTION!
If the swivel spout is extendable (not included in the standard scope of
delivery), it must not be loaded downwards.
Electrical connection
Personnel:
CAUTION!
The dosing unit may only be connected to 230 V AC, 50-60 Hz.
When making the electrical DG1-III connection, ensure compliance with the
applicable national regulations and local regulations.
The DG1-III 230 V /24 V mains transformer integrated in the unit supplies
the entire unit. The device is protected by appropriate protective elements
(thermal release) in the transformer.
To connect to the power supply, the DG1-III equipped with a 2.5 m mains
cable with plug. If necessary, this can be retracted into the housing.
WARNING!
The protective earth connection is marked by this symbol at the connection
points.
MAN049250 Rev. 1-01.2021
n Service personnel
28