Spare Parts Set Dla With Holder (Without Dosing Pump); Spare Parts Set For Pipe System In Case Of Contamination; Spare Parts Set Pipe Interrupter For Contamination - Ecolab DG1-III-DLA-PCB Manuel D'utilisation

Consumables and spare parts
12.3

Spare parts set DLA with holder (without dosing pump)

12.4

Spare parts set for pipe system in case of contamination

pre-assembled, consisting of:
2
1
3
12.5

Spare parts set pipe interrupter for contamination

Consisting of:
MAN049250 Rev. 1-01.2021
Pos. Designation
A Spare parts set DLA
with holder and screws
Pos. Designation
1 Solenoid valve (1 pc.)
4
2 Contact water meter (1 pc.)
3 Mixing housing pre-assembled (1 pc.)
4 Pipe breaker (1 pc.)
- VA flex hose G ½ 260mm silicone (1 pc.)
- Flat gasket 18.5 x 14 x 2 PE (2 pcs.)
- Cone compression fitting (1 pc.)
Designation
Pipe breaker (1 pc.)
VA flex hose G ½ 260 mm silicone (1 pc.)
Mixing housing pre-assembled (1 pc.)
Flat gasket 18.5 x 14 x 2 PE (2 pcs.)
58
Article no. (EBS no.)
216804 (on request)
Article no. (EBS no.)
216802 (on request)
Article no. (EBS no.)
216803 (on request)