Publicité
All manuals and user guides at all-guides.com
EC4L5000
ASSEMBLY AND INSTALLATION
CDI magneto
NOTE:
G
G
NOTE:
G
G
G
4 - 76
CDI MAGNETO
1. Install:
Stator 1
G
Screw (stator) 2
G
10 Nm (1.0 m · kg, 7.2 ft · lb)
Apply the sealant to the grommet of the CDI
magneto lead.
Tighten the screws using the T30 bit.
®
Quick gasket
:
ACC-QUICK-GS-KT
YAMAHA Bond No. 1215:
90890-85505
2. Install:
Woodruff key 1
G
Rotor 2
G
Clean the tapered portions of the crankshaft
and rotor.
When installing the woodruff key, make sure
that its flat surface a is in parallel with the
crankshaft center line b.
When installing the rotor, align the keyway c
of the rotor with the woodruff key.
3. Install:
Plain washer
G
Nut (rotor) 1
G
48 Nm (4.8 m · kg, 35 ft · lb)
Use the rotor holding tool 2.
Rotor holding tool:
YU-1235/90890-01235
ENG
Publicité
