Publicité
All manuals and user guides at all-guides.com
2
THROTTLE CABLE ADJUSTMENT
EC35A001
THROTTLE CABLE ADJUSTMENT
1. Check:
2. Adjust:
Throttle grip free play adjustment steps:
G
1
NOTE:
G
G
1st step:
G
G
2nd step:
G
G
G
After adjusting, turn the handlebar to
right and left and make sure that the
engine idling does not run faster.
G
3 - 10
Throttle grip free play a
G
Out of specification → Adjust.
Throttle grip free play a:
3 ~ 5 mm (0.12 ~ 0.20 in)
Throttle grip free play
G
Remove the throttle cable cap 1 and
throttle cable cover 2.
Before adjusting the throttle cable free
play, the engine idle speed should be
adjusted.
When the motorcycle is accelerating,
throttle cable #1 3 is pulled and throttle
cable #2 4 is pushed.
Loosen the locknuts 5 on throttle cable #2.
Adjust the free play by changing their
tightening position.
Loosen the locknuts 6 on throttle cable #1.
Adjust the free play by changing their
tightening position.
Tighten the locknuts.
WARNING
Install the throttle cable cover and throttle
cable cap.
INSP
ADJ
Publicité
