Panasonic WX-CC411A Mode D'emploi page 25

2
Before proceeding any further, push down the position of the power cord clamp inserted into this unit,
as shown in the figure below. Insert the power cord plug into the power socket of this unit, adjust the
position of the power cord clamp, and secure the power cord.
w Wiring the Euroblock connector
p
1
A detachable Euroblock connector is provided for this unit's connectors. As shown in the figure below,
insert a slot-head screwdriver into the gap, and remove the Euroblock connector from this unit.
WX-CC411_PGQX2068ZA_IG.indb 25
25
2016/05/18 13:30:38