Panasonic WX-CC411A Mode D'emploi page 19

4 Camera 4 screen
Images from Network Camera 4 appear on this part of
the screen.
5 Camera 1 full-screen display button
When this button is touched, images from Network
Camera 1 are displayed in full-screen mode.
6 Camera 2 full-screen display button
When this button is touched, images from Network
Camera 2 are displayed in full-screen mode.
7 Camera 3 full-screen display button
When this button is touched, images from Network
Camera 3 are displayed in full-screen mode.
8 Camera 4 full-screen display button
When this button is touched, images from Network
Camera 4 are displayed in full-screen mode.
9 4-screen simultaneous display button
When this button is touched, the screen is split into four
parts, and the images from Network Cameras 1, 2, 3 and
4 are displayed simultaneously.
Note
p p When a camera image is touched while the screen
is split into four parts and images are displayed
simultaneously, the touched image is displayed in full-
screen mode.
WX-CC411_PGQX2068ZA_IG.indb 19
w Quick Operation screen
p
The Quick Operation screen appears on the LCD display
when (Quick Operation button) on the touch panel is
touched.
1
2 3
1 Common button
This button is used to display the Quick Operation screen
that is common to both lanes.
2 Lane A button
This button is used to display the Quick Operation screen
for lane A.
3 Lane B button
This button is used to display the Quick Operation screen
for lane B.
Note
p p The lane B button is displayed only when the
WX-CC412A is used.
19
2016/05/18 13:30:35