Publicité
Les langues disponibles
Les langues disponibles
Description of screens
w Setting Information screen
p
The Setting Information screen appears when
(Setting Information button) on the touch panel is touched.
This unit's settings and statuses can be confirmed on this
screen.
1
2
1 Setting Info [Setting Info]
When the Setting Info button is touched, the display on
the LCD display switches to the setting list screen.
2 Security Alert [Security Alert]
When the Security Alert button is touched, the display on
the LCD display switches to the Security Alert screen.
(P.17)
3 Help Contact [Help Contact]
When the Help Contact button is touched, the display on
the LCD display switches to the Help Contact screen.
(P.18)
4 System Information [System Info]
When the System Info button is touched, the screen on
the LCD display switches to the System Info screen. (P.18)
Setting list screen
The setting list screen is displayed when the unit's power is
turned on or when the [Setting Info] button is touched.
3 6 7
8
2
1
16
WX-CC411_PGQX2068ZA_IG.indb
16
3
4
9
4
:
5
1 Lane name display [A] ([B])
The lane name is displayed. The lane setting statuses are
displayed to the right of the lane name display.
When the WX-CC412A is used, lane B is also displayed
underneath lane A.
2 Lane mode display [Single/Dual/Tandem]
Lane mode that has been set is displayed.
WX-CC411A: [Single] is displayed.
WX-CC412A: [Dual] is displayed when the tandem lane
setting is OFF, and [Tandem] is displayed when it is ON.
3 Nighttime Volume display
[Nighttime Volume ON/OFF/AUTO]
The setting status of the volume of the order post speaker
at night is displayed.
Note
p p The "Nighttime Volume" is a function that is used to
adjust the volume level of the voice output from the
order post speaker.
4 Speed Team display [Speed Team ON/OFF]
The status of the speed team operation is displayed.
Note
p p "Speed Team operation" refers to a mode of operation
in which, at busy times when there are more vehicles
than the lanes can accommodate, normal operation is
suspended, the vehicle detectors are shut off, and the
store personnel go directly to the customers in their
vehicles to take their orders.
5 Cross Beep display [Cross Beep ON/OFF]
The Cross Beep status is displayed.
This appears only when the WX-CC412A is used.
Note
p p "Cross Beep" is a function that sends the beep tone
announcing the arrival of customers across the two
lanes.
6 Lane A order post speaker volume display
[Outside]
The volume level of the lane A order post speaker is
displayed.
7 Lane A kitchen speaker volume display [AUX]
The volume level of the lane A kitchen speaker is
displayed.
2016/05/18
13:30:31
Publicité
