Panasonic WX-CC411A Mode D'emploi page 22

Installation procedures
2
Mount this unit onto the four hooks of the wall mounting bracket.
3
Look at the confirmation window (which is marked "CHECK"), and confirm that this unit fits properly
into place.
22
WX-CC411_PGQX2068ZA_IG.indb 22
LANE A LANE B
Check that the "¡" marks of the wall mounting bracket are visible.
If they are not visible, this means that this unit has not been
installed properly.
CNT COM CNT COM CNT CNT COM CNT TxD SG RxD VIDEO OUT 10BASE-T
1 2 ３ ４
100BASE-TX
DEVICE ALERT RS-232C
2016/05/18 13:30:37