Panasonic WX-CC411A Mode D'emploi page 12

Major operating controls and their functions
w Terminal block
p
 
4 Power input terminal [AC IN]
Connect the accessory power cord to this terminal. After
connecting it, secure the cord using the power cord
clamp. (Refer to p.24 "Securing the power cord".)
5 Confirmation window [CHECK]
This window is used for confirmation purposes when this
unit is installed.
6 Lane A mic input [OUT MIC]
This is connected to the microphone for the order post
installed in lane A.
7 Lane A speaker output
[OUT SP (8 Ω) Class2 Wiring]
This is connected to the speaker for the order post
installed in lane A.
8 Lane A line output [LINE OUT]
The same communication that is output from OUT SP of
lane A is output.
9 Lane A kitchen mic input [AUX MIC]
This is connected to the gooseneck microphone installed
in the lane A kitchen.
It is used to speak with the customer who has arrived at
the order post for lane A.
: Lane A kitchen speaker output
[AUX SP (8 Ω) Class2 Wiring]
This is connected to the speaker installed in the lane A
kitchen.
It is used to speak with the customer who has arrived at
the order post for lane A.
 Lane A line input [LINE IN]
External communications can be broadcast
simultaneously to all the All-In-One Headsets or Belt
Packs and to the lane A kitchen speaker.
12
WX-CC411_PGQX2068ZA_IG.indb 12
LANE A
       
LANE B
CNT COM CNT COM CNT CNT COM CNT TxD SG
1 2 ３ ４
DEVICE ALERT RS-232C
COM CNT
１
      
 Lane A vehicle detector input [VDET]
This is connected to the vehicle detector installed in
lane A.
 Lane B mic input [OUT MIC]
This is connected to the microphone for the order post
installed in lane B.
 Lane B speaker output
[OUT SP (8 Ω) Class2 Wiring]
This is connected to the speaker for the order post
installed in lane B.
 Lane B line output [LINE OUT]
The same communication that is output from OUT SP of
lane B is output.
 Lane B kitchen mic input [AUX MIC]
This is connected to the gooseneck microphone installed
in the lane B kitchen.
It is used to speak with the customer who has arrived at
the order post for lane B.
 Lane B kitchen speaker output
[AUX SP (8 Ω) Class2 Wiring]
This is connected to the speaker installed in the lane B
kitchen.
It is used to speak with the customer who has arrived at
the order post for lane B.
 Lane B line input [LINE IN]
External communications can be broadcast
simultaneously to all the All-In-One Headsets or Belt
Packs and to the lane B kitchen speaker.
 Lane B vehicle detector input [VDET]
This is connected to the vehicle detector installed in
lane B.
RxD
VIDEO OUT 10BASE-T
100BASE-TX
  
2016/05/18 13:30:25