Publicité
Les langues disponibles
Les langues disponibles
ON/OFF LEVER
A
Press the start button and then squeeze
the on/off lever (A or B) to start the product.
Release the start button and keep squeezing
the on/off lever to run the blade. Release the
on/off lever to stop the blade.
GENERAL MOWING TIPS
■
When cutting long grass, reduce walking
speed to allow for more effective cutting
and a proper discharge of the clippings.
■
Do not cut wet grass; it will stick to the
underside of the deck and prevent proper
collection or discharge of grass clippings.
■
New or thick grass may require a higher
cutting height.
■
To collect the grass cuttings for disposal,
remove the mulching plug and fit the
grass catcher, making sure that the
grass discharge chute cover is properly
closed. Empty the grass catcher regularly;
otherwise, the discharge chute will become
blocked with grass cuttings.
■
If you are making a light cut and wish
for the grass cuttings to remain on the
lawn, fit the mulching plug, and close the
grass discharge chute cover to cover the
discharge opening. It is not necessary to fit
the grass catcher in this case.
■
The product is designed to operate and cut
most effectively when moving forwards.
FOR CORDLESS MODE
■
The run time of the battery depends on the
condition, length, and density of the grass.
■
Adjust the cutting height of the lawnmower
to suit the current condition of the lawn.
■
A higher cutting height extends the run
time of the battery pack.
■
For best performance, always cut off one-
third or less of the total height of the grass.
TRANSPORTATION AND STORAGE
■
Turn off the product, remove the isolator
key and the battery pack, or disconnect
the product from the power supply. Make
sure that all moving parts have come to a
complete stop. Allow the product to cool
B
down before storing or transporting.
■
Clean all foreign materials from the product.
Store the product in a cool, dry, and well-
ventilated place that is inaccessible to
children. Keep the product away from
corrosive agents such as garden chemicals
and de-icing salts. Do not store the product
outdoors.
■
For transportation in vehicles, remove
the isolator key, and secure the product
against movement or falling to prevent
injury to persons or damage to the product.
Use extreme caution when lifting or tilting
the product for maintenance, cleaning,
storage, or transportation. The blade is
sharp; keep all body parts away from the
blade while it is exposed.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local
and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further
advice.
MAINTENANCE
Use
replacement
attachments. Failure to do so can cause
possible injury, can contribute to poor
performance, and may void your warranty.
WARNING
WARNING
only
original
manufacturer's
parts,
accessories
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
and
English |
5
Publicité
