Instructions For Use - Nilfisk SR 1450 B Manuel D'utilisation

ENGLISH

INSTRUCTIONS FOR USE

Start (SR 1450 D)
NOTE
Machines with the EC marking are provided with safety devices in case the operator leaves the driver's seat.
The machine cannot be started unless the operator is sitting in position.
– Before starting the machine, make sure the parking brake (5, Fig. I) is engaged.
– Insert the ignition key in the ignition switch.
– Turn the accelerator lever (4, Fig. I) to idle.
– Turn the ignition key clockwise to the fi rst position. Battery charge, oil pressure and glow plug pre-heating warning lights
should be on.
– The glow-plug pre-heating warning light goes off: Turn the ignition key clockwise until the end of stroke. When the motor is on,
release the ignition key which will automatically return to the fi rst position.
NOTE
Before trying to start the machine again, turn the ignition key back to "0" position.
As soon as the machine has been started, check the battery charge, oil pressure and pre-heating warning lights are off.
Stop (SR 1450 D)
Turn the ignition key counterclockwise to "0" position and then remove it. Pull the parking brake lever.
Start (SR 1450 B)
NOTE
Machines with the EC marking are provided with safety devices in case the operator leaves the driver's seat.
The machine cannot be started unless the operator is sitting in position.
– Before starting the machine, make sure the parking brake (5, Fig. J) is engaged.
– Connect the battery cable socket with the machine cable plug.
– Be sure of the perfect connection.
– Insert the ignition key in the ignition switch.
– Turn the ignition key clockwise to the fi rst position. The battery charge indicator light should be on.
– Turn the ignition key clockwise until the end of stroke. When the motor is on, release the ignition key which will automatically
return to the fi rst position.
NOTE
Before trying to start the machine again, turn the ignition key back to "0" position.
After start-up, check that the battery charge indicator displays at least the 75% of charge.
Stop (SR 1450 B)
Turn the ignition key counterclockwise to "0" position and then remove it. Pull the parking brake lever.
14
USER MANUAL
33014811(3)2010-03 A SR 1450 B-D