Disposal - Nilfisk SR 1450 B Manuel D'utilisation

DISPOSAL

Used oils
Used lubricating and hydraulic oils should not be discharged into the environment (waterways, sewerage systems etc.) but they
should be delivered to authorized disposal companies.
It is recommended to respect scrupulously the law in force.
Such materials should be stored in perfectly sealed lidded containers, so that the used oil cannot leak out and contaminate other
substances, including rain water. Oil fi lters should be stored in the same way and delivered to authorized disposal companies.
Used lead batteries
Used batteries fall into the "toxic harmful" waste category.
They should be delivered to specially authorized companies for disposal.
If not possible, "temporary storage" should be carried out according to the law in force. This means, fi rst and foremost: having a
temporary storage authorization. Store in perfectly sealed plastic containers with a capacity at least equal to the volume of the
battery electrolyte. On no account should rain water leak into the containers.
Material collected by the machine
The material collected by the machine can and should be delivered as urban waste or similar to the Public Cleansing Services
(according to previous agreements).
This is possible provided that the waste does not contain toxic or harmful substances.
When cleaning environments which can present toxic-harmful waste, every single substance should be collected separately
and with empty hopper. The waste should then be entirely dumped into special containers whose handling should be carried out
according to the law in force and to provincial, regional and state rules.
Scrapping
At end of the machine life, dispose of all the below listed materials which form the machine.
It is recommended to deliver the machine to an authorized company who will provide for the machine correct disposal. For
the disposal of oils, fi lters and batteries, follow the above described procedures. The ABS and metal components can become
secondary raw materials. Hoses and gaskets as well as plastic and fi bre glass should be sorted into separate groups and delivered
to the Public Cleansing Services.
NOTE
Dispose of the machine different materials in suitable refuse disposal sites.
NOTE
Always respect the laws in force in the country concerned.
WEEE 2002/96/EC
SR 1450 B-D 33014811(3)2010-03 A
USER MANUAL ENGLISH
29