ENGLISH
CLEANING AND MAINTENANCE
The machine cleaning can be carried out by non-specialized personnel. However, the person in charge of the cleaning should be
familiar with the energy source cut-off main controls and the main features of the machine to avoid any dangerous situation.
The machine maintenance should be carried out by highly skilled personnel, with a deep knowledge of the machine and its
components.
Mechanical, electrical and electronic maintenance is possible.
WARNING!
Any cleaning and maintenance operation should be carried out with the machine off.
Wait for all the parts to stop and cool down.
WARNING!
Protect eyes and hair when cleaning the machine with compressed air guns.
If the machine is working in a toxic environment, wear a special mask and adequate protective clothing when
carrying out maintenance work on the dust fi lter.
CLEANING
Machine general cleaning
Clean the coating, panels and controls of the machine with a soft cloth, either dry or lightly soaked in a mild detergent solution.
NOTE
Do not use solvents such as alcohol, petrol or ethyl acetate as they could damage the surfaces.
Remove traces of dust and other dirt from the machine control panels (digital displays, indicator and warning lights, switches).
NOTE
Pay attention when cleaning the electrical components.
If necessary, the electrical components should be cleaned only by specialized personnel and non-corrosive products suitable for
electric circuits should be used.
20
USER MANUAL
33014811(3)2010-03 A
SR 1450 B-D