Instructions For Use; Unpacking; Machine Description - Nilfisk Advance BA 450 Manuel D'emploi Et D'entretien

INSTRUCTIONS FOR USE

Before using the machine, ensure that frequency and
voltage values, indicated in the related plate, match the
mains voltage (models with battery charger).
This manual helps the Operator to get the most from the
Nilfisk BA 450/530/530 Inox/BA610 machine.
Before operating the machine, read carefully the following
information.
NOTE
Encircled capital letters refer to an item
illustrated.

UNPACKING

On delivery, carefully check that the machine and its
packing were not damaged during transportation. If the
damages are evident, keep the packing and have it
checked by the Parcel Service that delivered it. Call the
Parcel Service immediately to fill in a request for a
compensation for damages.
08812382(5)2004-05 A
USE AND MAINTENANCE MANUAL

MACHINE DESCRIPTION

(See Fig. A)
1. Speed control potentiometer*
2. On/off key switch*
3. Brushes switch
4. Brush release switch (BA610)
5. Vacuum switch
6. Discharged battery warning light
7. Solution flow control lever
8. Hour counter
9. Start/Stop paddle
10. Squeegee lifting/lowering lever
11. Brush lifting/lowering pedal
12. Recovery tank
13. Recovery tank automatic float shut-off
14. Pre-filter turbine
15. Solution tank
16. Vacuum motor
17. Brush motor
18. Drive adjusting knobs
19. Brushes
20. Integrated battery charger (**)
21. Electronic board
21.a Drive electronic board (*)
22. Drive motor*
23. Batteries
24. Squeegee assembly
25. Acoustic insulation assembly
26. Battery selector
(*) BA 450/530/530 Inox with drive motor only
(**) Optional
3