Sage the Barista Express BES875 Guide Utilisateur page 8

Functions
BEFORE FIRST USE
Machine Preparation
Remove and discard all labels and packaging
materials attached to your espresso machine.
Ensure you have removed all parts and
accessories before discarding the packaging.
Remove the packaging and the plastics
bagscontaining the water filter and water filter
holder.
Clean the water tank, portafilter, filter baskets,
milk jug and drip tray using warm water and a
gentle dish washing liquid. Rinse well, then dry
thoroughly before reassembling.
NOTE
For machines in colour, attach the provided drip
tray protection guard cover to the drip tray. DO
NOT DISCARD.
Installing the Water Filter
• Remove the water filter and water filter holder
from the plastic bag.
• Soak the filter in cold water for 5 minutes.
• Wash the filter holder with cold water.
• Set the reminder for next month of replacement.
We recommend to replace the filter every
3 months.
8
• Insert the filter into the two parts of the
filter holder.
• To install the assembled filter holder into the
water tank, align the base of the filter holder
with the adapter inside the water tank.
Push down to lock into place.
• Fill the water tank with cold tap water before
sliding back into position at the back of the
machine and locking into place.
First Use Flush Cycle
• Ensure the water filter is securely fitted inside
the water tank.
• Fill the water tank with cold water up to the
MAX mark.
• Ensure the hopper is locked into position.
• Plug the power cord into a 230V power outlet.
Press the POWER button to switch the machine
on. The POWER button light will flash while the
machine is heating.
• Place a large heat proof bowl under the group
head.
NOTE
If the hopper is not correctly locked into position,
the FILTER SIZE LED's will flash.
1. Press 2 CUP button to run hot water through
the group head.