Freezer Baskets; Door Wine/Beverage Rack - GE 22 Série Manuel D'utilisation Et D'installation

Masquer les pouces Voir aussi pour 22 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Not all features are on all models.
QuickSpace
Shelf
(on some models)
This shelf splits in half and slides under itself
for storage of tall items on the shelf below.
This shelf can be removed and replaced
or relocated just like Slide-Out Spillproof
Shelves.
On some models, this shelf can not be used
in the lowest position.

Freezer Baskets

To remove, slide out to the stop position,
lift the front past the stop position, and
slide out.
Slide-Out Freezer Shelves
To remove, slide out to the stop position,
lift the front past the stop position, and slide
out from rib.
Fixed Freezer Shelves
To remove, lift the shelf up at the left side and
then bring the shelf out.

Door Wine/Beverage Rack

This rack holds up to 5 cans or one bottle
of wine.
The rack hangs from the sides
of the dairy bin.
To remove:
Empty the wine/beverage rack.
Holding the bottom of the dairy bin,
lift the front straight up, then lift up
and out.
To detach the rack from the dairy bin,
pull the rack's side wires out of the holes
on each side of the dairy bin.
Make sure you push the baskets all the
way back in before you close the door.
Make sure you push the shelves all the way
back in before you close the door.
NOTE FOR DISPENSER MODELS: In order
to take full advantage of the tilt-out ice bin
(on some models), only store items on the
shelf below the ice bin that are no taller
than the lowest point on the bin.
(on some models)
To replace:
Reattach the rack to the sides of the bin.
Engage the back side of the bin in
the molded supports on the door.
Then push down on the front of
the bin. The bin will lock into place.
GEAppliances.com
7

Publicité

Chapitres

Table des Matières
loading

Table des Matières