Important Safeguards - Edgecraft ChefsChoice 120 Mode D'emploi

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should
always be followed including the following:
1. Read all instructions.
2. To protect against electrical hazards, do not immerse the
Chef'sChoice® in water or other liquid.
3. Make sure only clean knife blades are inserted in the
Chef'sChoice®.
4. Unplug from outlet when not in use, before putting on or taking
off parts and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in
any manner.
U.S. customers: You may return your sharpener to EdgeCraft's
factory for service where the cost of repair or electrical or
mechanical adjustment can be estimated. When the electrical
cord on this appliance is damaged, it must be replaced by the
Chef'sChoice distributor or other qualified service to avoid the
danger of electrical shock.
Outside U.S.: Please return your sharpener to your local distributor
where the cost of repair or electrical or mechanical adjustment
can be estimated. If the supply cord of this appliance is
damaged, it must be replaced by a repair facility appointed by
the manufacturer because special tools are required. Please
consult your Chef'sChoice distributor.
7. CAUTION! This appliance may be fitted with a polarized plug
(one blade is wider than the other). To reduce the risk of electric
shock, this plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not modify the plug in
any way.
8. The use of attachments not recommended or sold by EdgeCraft
Corporation may cause fire, electric shock or injury.
English — 2