Changing The Mp3 Playback Mode; Turning On Or Off The Resume Play For Mp3 Disc - JVC MX-GC5 Manuel D'instructions

To go to another track directly using the number
buttons
Ex.: For track number 5, press 5.
For track number 15, press +10,
then 5.
For track number 20, press +10,
then 10.
For track number 32, press +10,
+10, +10, then 2.
For track number 123, press +10
twelve times, then 3.
For Audio CD:
Pressing the number button(s) before or during play allows
you to start playing the selected track.
For MP3 disc:
• When the MP3 playback mode is the TRACK mode
(See the right column.)
Pressing the number button(s) before or during play allows
you to start playing the selected track on the disc.
• When the MP3 playback mode is the GROUP mode
(See the right column.)
Pressing the number button(s) before or during play allows
you to start playing the selected track in the current album.
If your entry is ignored
You have tried to enter a track number that does not exist on the disc
or in the album (for example, selecting track 14 in the album that
only has 12 tracks). Such entries are ignored.
17

Changing the MP3 Playback Mode

When playing an MP3 disc, you can choose the playback
mode of the MP3 disc as follows:
• TRACK mode:
The unit recognizes only tracks (files). You can play an
MP3 disc like an Audio CD.
• GROUP mode:
The unit recognizes tracks (files) and groups (folders) on an
MP3 disc. You can play an MP3 disc according to the way
how they are grouped.
In this mode, you can do the following operations:
• Pressing ¢/¡ or 4/1 (or turning the ¢ / 4
control on the unit) allows you to skip to the first track of
the previous or next groups. (See page 16.)
• Pressing the number button(s) allows you to start playing
the selected track in the current group. (See the left
column.)
On the remote control ONLY:
Press MP3.
The GROUP indicator appears when the MP3 playback mode
is the GROUP mode.
• Each time you press the button, the MP3 playback mode
changes between "TRACK" and "GROUP" alternately.

Turning On or Off the Resume Play for MP3 Disc

For MP3 disc, this unit can memorize the position on a disc
where you interrupt playback. By pressing CD 6, you can
start playback again from the interrupted position—Resume
play.
You can turning on and off Resume play for MP3 discs.
On the remote control ONLY:
Press SET/RESUME before or during playing
an MP3 disc.
• Each time you press the button, Resume play turns on and
off alternately.
The following operations will erase the memory of the
interrupted position when—
• Pressing 0 to eject the disc.
• Pressing one of the disc number buttons (or DISC SKIP on the
unit) to change the disc to play.
Current group number