Benning CC 1 Notice D'emploi page 7

clamp-on adapter for alternating current measurement
1. User notes
2. Safety note
3. Scope of delivery
4. Description of appliance tester
5. General information
6. Environment conditions:
7. Electrical specifications
8. Making measurements with the BENNING CC 1
9. Maintenance
1. User notes
These operating instructions are intended for
- skilled electricians and
- trained electrical personnel.
The BENNING CC 1 is intended for making measurements in dry environment.
It must not be used for making measurements in electric circuits with a
nominal voltage greater than 600 V DC/AC (for further details, see Section 6.
"Environmental conditions").
The following symbols are used in these operating instructions and on the
BENNING CC 1:
Warning of electrical danger!

Indicates instructions which must be followed to avoid danger to
persons.
Important, comply with the documentation!

The symbol indicates that the information provided in the operating
instructions must be complied with in order to avoid risks.
This symbol on the BENNING CC 1 means that the BENNING CC 1 is

totally insulated (protection class II).

(AC) Alternating current.
Ground (Voltage against ground).
09/ 2003
Operating instructions
BENNING CC 1
BENNING CC 1

5