Maintenance And Storage - Ribimex PR4EN1T432 Manuel D'instructions Et D'utilisation

5.5- Tips
• Use of this product can pose a danger to wildlife. Before attempting to use this machine, check
the area, particularly long grass and under bushes for signs of life. Relocate, if necessary.
• Always hold the tool firmly with both hands on handle and gripping surface. Never hold the
tool with one hand only.
• Use the tools only with balance and secure footing.
• Before starting a work, remove obstacles and cut branches in the working area.
VI. MAINTENANCE AND STORAGE
WARNING!
Before any intervention on product, ensure the engine is stopped and cooled down.
Besides, disconnect the spark plug wire from the spark plug to prevent accidental
engine starting.
CAUTION!
Use genuine parts only.
Reminder: In order to maintain the machine in good working condition, carry out regular
maintenance of the machine after each use and before storage. Any breach or inadequate maintenance
reduces the life of the machine and increases the risk of breakdowns and accidents.
6.1- Maintenance
Recommended frequency
Parts / Components
Fuel
Fuel filter
Air filter
Spark plug
Gearbox
Idle speed
Silicencer, spark
arrester, cylinder
exhaust port
Throttle lever, safety
lever, On/Off switch
Cutting attachments
Guide bar
Saw chain
Sprocket
Note:
#
( ) Cleaning frequently shall be increased if the machine is used in dusty environment.
(*) Replace the filter element only.
Fuel filter
• Open the fuel tank cap, use a wire hook and pull out the suction head through the tank
opening.
• Replace the fuel filter if it is hardened, contaminated or clogged.
Maintenance
Check level and spillage
Check/replace
Check
Clean
Replace
Clean/adjust
Replace
Refill grease
Check/adjust
Clean
Check
Check/clean
Check/clean
Check/sharpen
Check/replace
25 hours or
Before every
every 3
use
months
x
x
x
#
x ( )
x
x
x
x
x
x
50 hours or
100 hours or
every 6
every year
months
x (*)
x
x
x
x
Page 30 / 52