Permanent Monitor; Transmit An Ltr Call - Motorola CP200XLS Manuel De L'utilisateur

Permanent Monitor

1 A long press of the preprogrammed Monitor
button places the radio in Permanent Monitor
mode.
• You hear a good key tone.
2 A short press of the Monitor button cancels
Permanent Monitor mode and returns the
radio to normal operation.

TRANSMIT AN LTR CALL

Turn the Channel Selector knob to select the
1
appropriate LTR channel/talkgroup.
–or–
L M
or to select the appropriate LTR
channel/talkgroup.
2 Hold the microphone in a vertical position at a
distance of about 1 to 2 inches
(2.5 to 5 cm) from your mouth.
3 Press and hold the PTT button.
–or–
Press and release the PTT button and wait 3
seconds.
• If access to the trunked system was
successful, the red LED indicator lights
steady.
• If access to the trunked system was
unsuccessful, the red LED indicator blinks,
indicating that the system was busy or out-
of-range.
4 With the PTT button depressed, speak clearly
into the microphone.
5
Release the PTT button to listen.
23
English