Adjust The Volume; Select An Ltr Channel/Talkgroup - Motorola CP200XLS Manuel De L'utilisateur

ADJUST THE VOLUME

Turn the ON/OFF/Volume Control knob
clockwise to increase the volume, or
counterclockwise to decrease the volume.
–or–
Note: Your dealer can preprogram one of the
programmable buttons to Volume Set.
1 Hold down the Volume Set
page 16).
• You will hear a continuous tone.
2 Turn the ON/OFF/Volume knob to the desired
volume level.
3 Release the Volume Set button.
SELECT AN LTR CHANNEL/
TALKGROUP
Your CP200XLS display radio can be
programmed with up to 10 LTR sites and a
maximum of 100 talkgroups, in total, across
one or more sites (up to a total of 10 sites).
To select an LTR Channel/Talkgroup:
Turn the
1
the appropriate LTR channel/talkgroup.
–or–
L
channel/talkgroup.
–or–
Press any of the programmable buttons to
button
(see
access a preprogrammed talkgroup. Then
use either
L
channel/talkgroup.
Note: Site/talkgroup settings are programmed
Channel Selector knob to select
M
or
to select the appropriate LTR
the
Channel Selector knob or
M
and
to select the appropriate LTR
Note: The third option is available only if
your radio has been programmed
with a specified LTR channel/
talkgroup.
by your dealer.
21
English