Disconnect A Phone Call; Make A Phone Call D - Motorola CP200XLS Manuel De L'utilisateur

5 Enter your repeater access code, if necessary
(Full Keypad Model only)
6 Press and hold the PTT button to talk. Hold
the radio in a vertical position with the
microphone 1 to 2 inches (2.5 cm to 5 cm)
away from your mouth. Release the PTT
button when the other party wants to talk, both
parties will need to speak in turn.
7 Disconnect the phone call when the
conversation is completed.

DISCONNECT A PHONE CALL

MAKE A PHONE CALL D

Note: Only the first 8 digits of the phone number will
be displayed on your radio's display.
Press the preprogrammed Phone button (see
page 14), and skip to step 6.
– or –
1 Select a channel/talkgroup that has been
programmed for telephone.
J
2 to enter menu mode.
L M
3 or until
1 To disconnect a phone call, do one of the
(see page 38).
2
4
5
PHONE
following:
If your radio has Immediate Auto or Delayed
Auto programmed, go to step 2.
– or –
Enter the deaccess code using the DTMF
keypad and press the PTT button
Keypad Model only)
.
To exit Phone Mode:
Press the preprogrammed Phone button (see
page 18).
– –
or
K
Press and hold to disconnect the call.
Note: D disappears from the display.
J
PHONE
to select
Enter your repeater access code, if necessary
(Full Keypad Model only) (see page 38).
(Full
39
English