Wing Installation - Horizon Hobby E-Flite EFL FW 190A 1.5m BNF Basic Manuel D'utilisation

EN
Model Assembly Continued

Wing Installation

1. Align the hands-free servo connector and press the wing into the
wing saddle.
2. Secure the wing into position using the included 4 screws (M3 x 32mm) (A).
Use a 2mm hex driver to tighten the screws.
Disassemble in reverse order.
6
A
M3 x 32mm
Countersunk Machine Screw
Continued
Fw 190A 1.5m
A