Medion LIFE P61155 Notice D'utilisation page 49

To mount the soundbar on a wall, proceed as follows:
 Drill two parallel holes in the wall.
To do so, use an appropriate drill bit for the respective surface (dia. 5.5-6 mm,
depending on the wall construction). The holes are to be spaced 606 mm apart
(A).
 Push a dowel into each drilled hole as required.
 Screw both wall mountings supplied into the wall.
Ensure that the openings for hanging the soundbar point upwards (B).
 Loosen and remove the screws on the fixing points on the back of the soundbar.
 Replace the previously removed screws with the supplied wall mounting screws
and screw these into the fixing points (C).
 Attach the soundbar in the mounting holes on the wall mounts using the wall
mounting screws (D).
A
C
50
606 mm
B
D