Installation - Scale House ATM Mode D'emploi

3. INSTALLATION

a) Unpack then product.
b) If present (depending on the model), it is necessary to unscrew and remove the locking screw for the transportation
placed under the scale, as shown in the figure below:
SCREW FOR WASHING THE SCALE (Only on ATMI)
Placed under the ATMI scale, there is a knob, which serve to make the scale sealed IP67 (knob closed) when needed
wash, or IP65 (knob open) when one need to weigh.(See drawings):
NB.: The knob closed may have effects on the weighing, so it must be left open when the scale is used for weighing.
5