4.1 FUNCTION OF THE KEYS
4.2 FUNCTION OF THE INDICATORS
INDICATOR
CHARGE
5. SYMBOLS ON THE LCD DISPLAY
The LCD display has symbols which show the indicator's functioning status; you will find the description for each symbol
below.
SYMBOL
0
Indicates that the weight detected on the weighing system is near zero.
~
Indicates that the weight is not stable.
NET
Indicates that the displayed weight is a net weight.
PCS
Indicates that the number of sampled pieces is being displayed (see section 6.5).
kg
Indicates the unit of measure in use (kilogram).
g
Indicates the unit of measure in use (gram).
- It turns on or turns off the scale
- Clears the displayed gross weight if it's within +/- 2% of the total capacity.
- If pressed at length it allows to execute the reference operation (see section 6.5)
- A secondary function of incrementing the active digit or selecting when setting a
value for parameters or other functions.
- If pressed for an instant it executes the semiautomatic tare;
- If pressed at length it allows to convert from kg to g (see section 6.7).
- A secondary function of "Enter" key when setting parameters or other functions.
- Pressed together for an instant they allow to set the thresholds for the QUANTITY
CHECK function (see section 6.6).
Indicates that the battery is going to recharge (see chapter 3.2).
9
FUNCTION
FUNCTION